8. Bibliograpy
Abramovich H., et.al.; Experiments on Axial Compression Postbuckling Behavior of Stiffened Cylindrical Composite Panels; Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Material Conference, Norfolk, VI, USA, AIAA paper No. 2003-1793 (2003).
Abramovich H., Grunwald A., and Weller T.; Improved Postbuckling Simulation for Design of Fibre Composite Stiffened Fuselage Structures -POSICOSS- Part 1 - Test results; TAE Report No. 990, Technion, I.I.T., Haifa, Israel (2003).
Abramovich H., Pevsner P., and Weller T.; Improved Postbuckling Simulation for Design of Fibre Composite Stiffened Fuselage Structures- POSICOSS- Part 2 - Analysis and Comparisons;, TAE Report No. 991, Technion, I.I.T., Haifa, Israel (2003).
Almroth B.O., Holmes A.M.C; Buckling of Shells with Cutouts, Experiment and Analysis; International Journal Solids and Structures, Vol 8, pp 1057-1071 (1972).
Basar Y. and Ding Y.; Finite-rotation shell elements for the analysis of finite-rotation shell problems; International Journal for Numerical Methods in Engineering, Vol. 34, pp. 165-169 (1992).
Bathe K.J; Finite Element Procedures; Prentice-Hall (1996).
Bathe K. J.; ADINA - A Finite Element Program for Automatic Dynamic Incremental Analysis; MIT Report 82448-1 (1976).
Buechter N. and Ramm E.; Shell theory versus degeneration — a comparison in large rotation finite element analysis; International Journal for Numerical Methods in Engineering, Vol. 34, pp. 39–59 (1992).
Clough R. W., Penzien J.; Dynamics of Structures; McGraw-Hill (1993); ISBN 0071132414, 9780071132411.
COCOMAT - Improved material exploitation at safe design of composite airframe structures by accurate simulation of collapse; EC funded project in the 6th Framework Programme, Contract No AST3-CT-2003-502723 (2003).
Cook, R.D.; Improved two-dimensional finite element; ASCE J. Struct. Div., ST9, 1851-1863 (1974).
Hashin Z.; Failure Criteria for Unidirectional Fiber Composites; Journal of Applied Mechanics, 1, 47, pp. 329-334 (1980).
Healey T.; A group theoretic approach to computational bifurcation problems with symmetry; Computer Methods in Applied Mechanics and Engineering, Vol. 67 pp. 257-295 (1988).
Goto Y., Watanabe Y., Kasugai T., Obata M.; Elastic buckling phenomenon applicable to deployable rings, International Journal of Solids and Structures, Vol. 29, No. 7, pp. 893-909 (1992).
Kar A., et.al; Convergence in highly nonlinear cable net problems; Journal of the Structural Division ACE, ST, pp 321-334 (1973).
Knight N.F; Raasch Challenge for Shell Elements; AIAA Journal, Vol. 35, No. 2, pp. 375-381 (February 1997).
Knight N.F., Rankin C.C.; STAGS Example Problems Manual; NASA/CR-2006-214281 (2006).
Kreith F.S. and Bohn M.S.; Principles of Heat Transfer; Brooks/Cole Pub. Corp. (2001).
MacNeal R.H. and Harder R.L.; A proposed standard set of problems to test finite element accuracy; Finite Elements in Analysis and Design 1, pp. 3-20 (1985).
Pinho S.T., Davila C.G., Camanho P.P., Iannucci L., Robinson P; Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity; NASA/TM-2005-213530 (2005).
Rebel G.; Finite Rotation Shell Theory including Drill Rotations and its Finite Element Implementation; Delft University Press (1998).
Remmers J; Mode jumping with B2000; Master’s thesis, Delft University of Technolog (1998).
Reddy N.; Mechanics of Laminated Composite Plates and Shells; Boca Raton, CRC Press, 2. edition (2004).
Riks E., Rankin C.C., and Brogan F; On the solution of mode-jumping phenomena in thin-walled shell structures; Computer Methods in Applied Mechanics and Engineering 136, pp 59-92 (1996).
Riks E. and Rankin C.C.; Computer simulation of the buckling behavior of thin shells under quasi-static loads; Archive of Computational Mechanics in Engineering 4, pp 325-351 (1997).
Young W. and Budinas R.G; Roark’s Formulas for Stress and Strain; McGraw-Hi (2002); ISBN 0-07-072542-X.
Scordelis A.C:, Lo K.S.; Computer analysis of cylindrical shells; J. Amer. Concr. Inst 61, pp. 539-561 (1969).
Siegel L. and Howell J.R.; Thermal Radiation Heat Transfer, 4th edition; Taylor and Francis, New York (2001).
Stein M; Loads and deformation of buckled rectangular plates; NASA Technical Report, National Aeronautics and Space Administration (1959).
Verolme K.; The development of a design tool for fiber metal laminate compression panels; PhD thesis, Delft University of Technology (1995).