Abramovich H.,, Experiments on Axial Compression Postbuckling Behavior of Stiffened Cylindrical Composite Panels, Proceedings of 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Material Conference, Norfolk, VI, USA, AIAA paper No. 2003-1793, 2003


Abramovich H., A. Grunwald and T. Weller, Improved Postbuckling Simulation for Design of Fibre Composite Stiffened Fuselage Structures -POSICOSS- Part 1 - Test results, TAE Report No. 990, Technion, I.I.T., Haifa, Israel, 2003


Abramovich H., P. Pevsner and T. Weller, Improved Postbuckling Simulation for Design of Fibre Composite Stiffened Fuselage Structures- POSICOSS- Part 2 - Analysis and Comparisons, TAE Report No. 991, Technion, I.I.T., Haifa, Israel, 2003


Almroth B.O., Holmes A.M.C; Buckling of Shell with Cutouts, Experiment and Analysis; International Journal Solids and Structures, Vol 8, pp 1057-1071, 1972


Y. Basar, Y.Ding; Finite-rotation shell elements for the analysis of finite-rotation shell problems; International Journal for Numerical Methods in Engineering, Vol. 34, pp. 165-169, 1992.


Bathe K.J; Finite Element Procedures; Prentice-Hall (1996)


Bathe K. J.; ADINA - A Finite Element Program for Automatic Dynamic Incremental Analysis; MIT Report 82448-1 (1976).


N. Buechter and E. Ramm; Shell theory versus degeneration — a comparison in large rotation finite element analysis; International Journal for Numerical Methods in Engineering, Vol. 34, pp. 39–59, 1992.


Clough R. W., Penzien J.; Dynamics of Structures; McGraw-Hill (1993); ISBN 0071132414, 9780071132411


COCOMAT - Improved material exploitation at safe design of composite airframe structures by accurate simulation of collapse, 2003, EC funded project in the 6th Framework Programme*, Contract No AST3-CT-2003-502723


Cook, R. D.; Improved two-dimensional finite element; ASCE J. Struct. Div., ST9, 1851-1863 (1974).


Hashin Z.; Failure Criteria for Unidirectional Fiber Composites; Journal of Applied Mechanics, 1, 47, pp. 329-334 (1980).


Healey T.; A group theoretic approach to computational bifurcation problems with symmetry’, Computer Methods in Applied Mechanics and Engineering, Vol. 67 pp. 257-295, 1988.


Goto Y., Watanabe Y., Kasugai T., Obata M., Elastic buckling phenomenon applicable to deployable rings, International Journal of Solids and Structures, Vol. 29, No. 7, pp. 893-909 (1992).


Kar A.,; Convergence in highly nonlinear cable net problems; Journal of the Structural Division ACE, ST, pp 321-334, March 1973.


Knight N.F; Raasch Challenge for Shell Elements; AIAA Journal, Vol. 35, No. 2, February 1997, pp. 375-381.


Norman F. Knight N.F., Rankin C.C.; STAGS Example Problems Manual’, March 2006


Kreith F.S., Bohn M.S.; Principles of Heat Transfer; Brooks/Cole Pub. Corp., 2001.


MacNeal R.H., Harder R.L.; A proposed standard set of problems to test finite element accuracy; Finite Elements in Analysis and Design 1 (1985) pp. 3-20.


Pinho S.T., Davila C.G., Camanho P.P., Iannucci L., Robinson P; Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity; NASA/TM-2005-213530 (2005).


Rebel G.; Finite Rotation Shell Theory including Drill Rotations and its Finite Element Implementation; Delft University Press 1998.


Reddy N.; Mechanics of Laminated Composite Plates and Shells; Boca Raton, CRC Press, 2. edition, 2004.


E. Riks, C. Rankin and F. Brogan. On the solution of mode-jumping phenomena in thin-walled shell structures. Computer Methods in Applied Mechanics and Engineering 136, pp 59-92, 1996.


E. Riks and C. Rankin. Computer simulation of the buckling behavior of thin shells under quasi-static loads. Archive of Computational Mechanics in Engineering 4, pp 325-351, 1997.


Roarke R.J.; Formulas for stress and strain; McGraw-Hill 975; ISBN 0-07-053031-9.


Siegel L, Howell J.R.; Thermal Radiation Heat Transfer, 4th ed.; Taylor and Francis, New York, 2001


Scordelis A.C:, Lo K.S.; Computer analysis of cylindrical shells; J. Amer. Concr. Inst 61, pp. 539-561 (1969).


M. Stein. Loads and deformation of buckled rectangular plates. NASA Technical Report, National Aeronautics and Space Administration, 1959.


J. Remmers. Mode jumping with B2000. Master’s thesis, Delft University of Technology, 1998.


K. Verolme. The development of a design tool for fiber metal laminate compression panels. PhD thesis, Delft University of Technology, 1995.